DRV8823DCA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 8V~32V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8823 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Power Supplies | 8/27V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Serial |
| Output Configuration | Half Bridge (8) |
| Current - Output | 1.5A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 8mA |
| Collector Emitter Voltage (VCEO) | 32V |
| Max Collector Current | 1A |
| Voltage - Load | 8V~32V |
| Switching Frequency | 50kHz |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8823DCA Overview
There is a Tubepackage included in the design.The part is packged with 48-TFSOP (0.240, 6.10mm Width) Exposed Pad case.The part should be mounted by Surface Mount.In this case, it is appropriate for the component connected to General Purpose.8V~32V volts can be supplied by the device.There is a temperature range of -40°C~150°C TJin which this device operates.This motor type can be categorized as Brushed DC.This part has 48termination options.In this case, the voltage can be applied to the load at the rate of 8V~32V.I would like to remind you that this amplifier should be operated at 24V.Its recommended mounting way is Surface Mount.Maintain a 1.5Aoutput current for the part.According to the DRV8823part number, the part is found.The device has 48 pins.Drivers controllers belongs to the series [0].Drivers controllers is possible to access 4outputs.This motor type can be recognized as Stepper.
DRV8823DCA Features
Applications : General Purpose
Load voltage across the chip 8V~32V
base on DRV8823 number
designed with 4 outputs
Motor Type classified as Stepper
DRV8823DCA Applications
There are a lot of Texas Instruments DRV8823DCA motor drivers applications.
- Side marker lights
- LED bias
- Dome
- Monitoring the energy that the luminaire uses
- Hazardous application
- Telltale lights
- PDAs
- Architectural lighting
- Turn signals
- Camera-enabled smartphones
