DRV8823DCAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 8V~32V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8823 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 8 |
| Output Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 32V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Serial |
| Nominal Supply Current | 5mA |
| Output Configuration | Half Bridge (8) |
| Current - Output | 1.5A |
| Voltage - Load | 8V~32V |
| Max Junction Temperature (Tj) | 150°C |
| Switching Frequency | 50kHz |
| Motor Type | Stepper |
| Ambient Temperature Range High | 85°C |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8823DCAR Overview
This package was designed with Tape & Reel (TR)in mind.There is 48-TFSOP (0.240, 6.10mm Width) Exposed Pad case included with the part.A mounting position of Surface Mountis recommended for the part.For the component connected to [0], it is suitable.Drivers controllers is capable of supplying 8V~32V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.The motor type can be classified as Brushed DC.This part provides 48terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.This amplifier should be operated at 24V.Ideally, it should be mounted in the Surface Mountposition.The output current should remain at 1.5A.As a result of the DRV8823part number, it can be found.The device has 48 pins.Drivers controllers is part of the series [0].There are 8 outputs available.In this case, the output voltage is kept at 3.3V volts.The motor type can be recognized as Stepper.
DRV8823DCAR Features
Applications : General Purpose
Load voltage across the chip 8V~32V
base on DRV8823 number
designed with 8 outputs
Motor Type classified as Stepper
DRV8823DCAR Applications
There are a lot of Texas Instruments DRV8823DCAR motor drivers applications.
- Handheld devices
- Arena lighting
- Commercial office
- Accurate LED current matching
- Running preventive- maintenance diagnostics
- Dome
- Infotainment backlighting
- Brake lights
- Smart lighting applications
- Step-up or step-down driver topologies
