DRV8824PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 120.003531mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Integrated Circuit (IC) |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 8.2V~45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8824 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 24V |
| Number of Channels | 2 |
| Interface | Logic |
| Operating Supply Current | 5mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.6A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 8mA |
| Collector Emitter Voltage (VCEO) | 45V |
| Max Collector Current | 1.1A |
| Voltage - Load | 8.2V~45V |
| Switching Frequency | 50kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/32 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8824PWP Overview
Drivers controllers is designed with Tube package.28-PowerTSSOP (0.173, 4.40mm Width)cases are included with the part.The part should be mounted by Surface Mount.This component is suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 8.2V~45V volts.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.There are 28 terminations available in the part.There is the option of applying the voltage to the load at the rate of 8.2V~45V.You should run this amplifier at 24V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Maintain a 1.6Aoutput current for the part.The DRV8824part number is used to locate the part.28 pins are provided for its design.Drivers controllers belongs to Motion Control Electronics series.The output voltage is maintained at 24V.This motor type can be recognized as Stepper.This device operates on 5mAsupply current.Controller ic has 2channels.
DRV8824PWP Features
Applications : General Purpose
Load voltage across the chip 8.2V~45V
base on DRV8824 number
Motor Type classified as Stepper
DRV8824PWP Applications
There are a lot of Texas Instruments DRV8824PWP motor drivers applications.
- Camcorders
- PWM generators
- Accurate LED current matching
- Side marker lights
- Lighting for health and wellbeing
- Street lights
- LED ballasts
- Running preventive- maintenance diagnostics
- PDAs
- High brightness LED lighting
