DRV8824PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 8.2V~45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Frequency | 250kHz |
| Base Part Number | DRV8824 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 24V |
| Supply Voltage-Max (Vsup) | 45V |
| Supply Voltage-Min (Vsup) | 8.2V |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 8mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.6A |
| Voltage - Load | 8.2V~45V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/32 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8824PWPR Overview
This package is designed to work with [0].There is 28-PowerTSSOP (0.173, 4.40mm Width) case included with the part.To mount the part by [0], it is recommended that you do so.This component is suitable for the component connected to General Purpose.This device is capable of supplying voltages up to 8.2V~45V volts.A range of -40°C~150°C TJis available for operating temperature.In this part, there are 28 terminations available.If the voltage is applied to the load at the rate of [0], the load will be affected.This amplifier should be operated at 24V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Set the part's output current to 1.6A.The device utilizes the IC STEPPER MOTOR CONTROLLERwhich is an analog IC.According to the DRV8824part number, the part is found.Drivers controllers is designed wDrivers controllersh 28 pins.Drivers controllers belongs to Motion Control Electronics series.1outputs are available in total.Drivers controllers is maintained at 24V volts.There is a frequency of 250kHzthat can be achieved.
DRV8824PWPR Features
Applications : General Purpose
Load voltage across the chip 8.2V~45V
base on DRV8824 number
designed with 1 outputs
DRV8824PWPR Applications
There are a lot of Texas Instruments DRV8824PWPR motor drivers applications.
- parking lights
- Matrix LED dimmers
- Automotive exterior and interior lighting
- Charge pump circuits
- Turn signals
- Home lighting systems
- A cross between entertainment
- Indicator circuit
- Street lights
- Commercial office
