DRV8830DGQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Battery Powered |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 2.75V~6.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8830 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 1.285V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2.75V |
| Interface | I2C |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 1.4mA |
| Output Configuration | Half Bridge (2) |
| Output Current-Max | 1A |
| Supply Current-Max (Isup) | 2mA |
| Collector Emitter Voltage (VCEO) | 6.8V |
| Max Collector Current | 1A |
| Voltage - Load | 2.75V~6.8V |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8830DGQ Overview
This package is designed to work with [0].Drivers controllers comes in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad case.Surface Mountshould be used for mounting the part.I believe it is suitable for the component connected to Battery Powered.In this case, the device can supply 2.75V~6.8V volts.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.Drivers controllers is possible to classify the motor type as Brushed DC.This part has 10termination options.A voltage of 2.75V~6.8Vcan be applied to the load.In order to get the best performance from this amplifier, it should be run at 3V.The recommended way to mount it is Surface Mount.In this device, the analog IC BRUSH DC MOTOR CONTROLLERis employed.Using the DRV8830part number, it is located.10pins are used in its design.Drivers controllers is part of the series [0].Drivers controllers is possible to access 1outputs.Drivers controllers is maintained at 1.285V volts.This motor type can be recognized as Brushed.
DRV8830DGQ Features
Applications : Battery Powered
Load voltage across the chip 2.75V~6.8V
base on DRV8830 number
designed with 1 outputs
Motor Type classified as Brushed
DRV8830DGQ Applications
There are a lot of Texas Instruments DRV8830DGQ motor drivers applications.
- Brake lights
- Hospitality buildings
- Large outdoor LED display
- Horticultural lighting
- Tunnel lights
- LED ballasts
- Indicator circuit
- Monitoring the energy that the luminaire uses
- AM radio
- PWM generators
