DRV8830DRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Weight | 39.292439mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Battery Powered |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 2.75V~6.8V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8830 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Power Supplies | 3/6.5V |
| Supply Voltage-Min (Vsup) | 2.75V |
| Interface | I2C |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 2mA |
| Output Configuration | Half Bridge (2) |
| Output Current-Max | 1A |
| Collector Emitter Voltage (VCEO) | 6.8V |
| Max Collector Current | 1A |
| Voltage - Load | 2.75V~6.8V |
| Switching Frequency | 44.5kHz |
| Drain to Source Resistance | 450mOhm |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8830DRCT Overview
Drivers controllers is designed wDrivers controllersh a package of [0].Parts are packaged in 10-VFDFN Exposed Padcases.In general, it is recommended that the part be mounted by Surface Mount.Fits the component connected to Battery Powered.Drivers controllers is capable of supplying 2.75V~6.8V volts.A range of -40°C~150°C TJis available for operating temperature.The motor type can be classified as Brushed DC.This part offers 10terminations.There is the option of applying the voltage to the load at the rate of 2.75V~6.8V.This amplifier should be operated at 3V.Ideally, it should be mounted in the Surface Mountposition.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.This can be determined by looking at the DRV8830 part number.The device has 10 pins.The Motion Control Electronicsseries includes this item.There are 1 outputs available.The motor type can be recognized as Brushed.The supply current used for its operating is 2mA.
DRV8830DRCT Features
Applications : Battery Powered
Load voltage across the chip 2.75V~6.8V
base on DRV8830 number
designed with 1 outputs
Motor Type classified as Brushed
DRV8830DRCT Applications
There are a lot of Texas Instruments DRV8830DRCT motor drivers applications.
- PWM generators
- Arena lighting
- Alternative to HID lights
- High power LED street light
- Side marker lights
- Dome
- Daytime running lights (DRLs)
- Display LED backlighting
- Dash
- Indicator
