DRV8832QDGQQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Battery Powered |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 2.75V~6.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8832 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 1.285V |
| Supply Voltage-Max (Vsup) | 6.8V |
| Power Supplies | 3/6V |
| Supply Voltage-Min (Vsup) | 2.75V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 1.4mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 1A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 2mA |
| Voltage - Load | 2.75V~6.8V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8832QDGQQ1 Overview
The design contains a Tubepackage.There is 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad case included with the part.Drivers controllers is recommended to mount the part by Surface Mount.For the component connected to [0], it is suitable.The device is capable of supplying a voltage of 2.75V~6.8V volts.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.Motors can be classified as Brushed DC.In this part, there are 10 terminations available.At a rate of [0], voltage can be applied to the load.In order to get the best performance from this amplifier, it should be run at 3V.Surface Mountis the recommended mounting method.The output current should be kept at 1A for the part.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.The DRV8832part number is used to locate the part.There are 10 pins on it.Drivers controllers belongs to the Motion Control Electronics series.There are 1 outputs available.In this case, the output voltage is kept at 1.285V volts.At [0], the output voltage is maintained.
DRV8832QDGQQ1 Features
Applications : Battery Powered
Load voltage across the chip 2.75V~6.8V
base on DRV8832 number
designed with 1 outputs
DRV8832QDGQQ1 Applications
There are a lot of Texas Instruments DRV8832QDGQQ1 motor drivers applications.
- Automotive applications
- Hospitality buildings
- Matrix LED dimmers
- Monitoring the energy that the luminaire uses
- Large outdoor LED display
- Dome
- Industrial high-bay lights
- High power LED street light
- Digital still cameras
- AM radio
