DRV8832QDGQRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Battery Powered |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 2.75V~6.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8832 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 1.285V |
| Supply Voltage-Max (Vsup) | 6.8V |
| Power Supplies | 3/6V |
| Supply Voltage-Min (Vsup) | 2.75V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 1.4mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 1A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 2mA |
| Voltage - Load | 2.75V~6.8V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8832QDGQRQ1 Overview
There is a Tape & Reel (TR)package included in the design.This part is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad case.Surface Mountshould be used for mounting the part.I believe it is suitable for the component connected to Battery Powered.The device can supply 2.75V~6.8V volts.There is a temperature range of -40°C~150°C TJin which this device operates.Drivers controllers is possible to categorize the motor type as Brushed DC.This part offers 10terminations.Drivers controllers is possible to apply voltage at a rate of 2.75V~6.8Vto the load.This amplifier should be operated at 3V.Its recommended mounting way is Surface Mount.Maintain a 1Aoutput current for the part.In this device, the analog IC BRUSH DC MOTOR CONTROLLERis employed.The DRV8832part number allows us to locate it.10pins are used in its design.The Motion Control Electronicsseries includes this item.Drivers controllers is possible to access 1outputs.Continually maintains the output voltage at 1.285V.Keeps the output voltage at Automotive, AEC-Q100at all times.
DRV8832QDGQRQ1 Features
Applications : Battery Powered
Load voltage across the chip 2.75V~6.8V
base on DRV8832 number
designed with 1 outputs
DRV8832QDGQRQ1 Applications
There are a lot of Texas Instruments DRV8832QDGQRQ1 motor drivers applications.
- Footwell lighting
- Tunnel lights
- Outdoor area lights
- Multiple output capability
- Landscape lighting
- Dome
- Architectural lighting
- Matrix LED dimmers
- LED ballasts
- High brightness LED lighting
