DRV8833CPWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Solenoids |
| Additional Feature | ALSO OPERATES WITH THE RANGE OF 0V TO 5.5V SUPPLY |
| Technology | Power MOSFET |
| Voltage - Supply | 2.7V~10.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | DRV8833 |
| Operating Supply Voltage | 10.8V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 1.7mA |
| Output Configuration | Half Bridge (4) |
| Output Current-Max | 1A |
| Supply Current-Max (Isup) | 3mA |
| Voltage - Load | 2.7V~10.8V |
| Drain to Source Resistance | 1.735Ohm |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8833CPWP Overview
The package contains [0].Drivers controllers comes in a 16-PowerTSSOP (0.173, 4.40mm Width) case.In most cases, it is recommended to mount the part at Surface Mount.In this case, it is appropriate for the component connected to DC Motors, General Purpose, Solenoids.Drivers controllers is capable of supplying 2.7V~10.8V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.A total of 16terminations are available in the part.The voltage can applied to the load at the rate of 2.7V~10.8V.I would like to remind you that this amplifier should be operated at 5V.In terms of mounting, it is recommended that it be mounted in Surface Mount.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.As a result of the DRV8833part number, it can be found.16pins are present on the device.This driver operates from a supply voltage of 10.8V.Drivers controllers is also characterized by ALSO OPERATES WITH THE RANGE OF 0V TO 5.5V SUPPLY.In order to operate it, 1.7mAsupply current is used.
DRV8833CPWP Features
Applications : DC Motors, General Purpose, Solenoids
Load voltage across the chip 2.7V~10.8V
base on DRV8833 number
Additional Feature: ALSO OPERATES WITH THE RANGE OF 0V TO 5.5V SUPPLY
DRV8833CPWP Applications
There are a lot of Texas Instruments DRV8833CPWP motor drivers applications.
- Telltale lights
- Building technology
- Fog lamps
- LED bias
- Mobile phone display backlight and key light driving
- PDAs
- PWM generators
- drivers for outdoor application
- Outdoor area lights
- Handheld devices
