DRV8833CRTET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Solenoids |
| Additional Feature | ALSO OPERATES WITH THE RANGE OF 0V TO 5.5V SUPPLY |
| Technology | Power MOSFET |
| Voltage - Supply | 2.7V~10.8V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8833 |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 10.8V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 1.7mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 600mA |
| Output Current per Channel | 600mA |
| Supply Current-Max (Isup) | 3mA |
| Voltage - Load | 2.7V~10.8V |
| Fault Protection | Over Temperature, Short Circuit |
| Drain to Source Resistance | 1.735Ohm |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8833CRTET Overview
The design includes a package of type [0].This part is packaged with a case of [0].To mount the part by [0], it is recommended that you do so.Fits the component connected to DC Motors, General Purpose, Solenoids.Drivers controllers is capable of supplying 2.7V~10.8V volts.A range of -40°C~150°C TJis available for operating temperature.The part supports 16terminations.There is the option of applying the voltage to the load at the rate of 2.7V~10.8V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.A Surface Mountmounting method is recommended for this product.This device utilizes the BRUSH DC MOTOR CONTROLLERanalog integrated circuit.As a result of the DRV8833part number, it can be found.The device has 16 pins.There are 2 outputs available.Drivers controllers offers maximum design flexibilDrivers controllersy due to Drivers controllerss 600mAoutput current.In addition to this, it is also characterized by ALSO OPERATES WITH THE RANGE OF 0V TO 5.5V SUPPLY.Its maximal output current reaches 1A to meet the operation requirements.Controller ic operates wController ich a supply current of 1.7mA.
DRV8833CRTET Features
Applications : DC Motors, General Purpose, Solenoids
Load voltage across the chip 2.7V~10.8V
base on DRV8833 number
designed with 2 outputs
Additional Feature: ALSO OPERATES WITH THE RANGE OF 0V TO 5.5V SUPPLY
DRV8833CRTET Applications
There are a lot of Texas Instruments DRV8833CRTET motor drivers applications.
- Infotainment backlighting
- Charge pump circuits
- Building technology
- Horticultural lighting
- Hospitality buildings
- Indicator
- Large outdoor LED display
- Dome
- A cross between entertainment
- Telltale lights
