DRV8833PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Solenoids |
| Subcategory | Motion Control Electronics |
| Technology | NMOS |
| Voltage - Supply | 2.7V~10.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DRV8833 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Operating Supply Voltage | 10.8V |
| Power Supplies | 3/10V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Output Current | 500mA |
| Logic Function | AND |
| Output Current per Channel | 1.5A |
| Supply Current-Max (Isup) | 3mA |
| Voltage - Load | 2.7V~10.8V |
| Fault Protection | Over Temperature, Short Circuit |
| Drain to Source Resistance | 360mOhm |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8833PWR Overview
Drivers controllers is designed with Tape & Reel (TR) package.Drivers controllers comes in a 16-TSSOP (0.173, 4.40mm Width) case.In most cases, it is recommended to mount the part at Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in DC Motors, General Purpose, Solenoids.This device is capable of supplying voltages up to 2.7V~10.8V volts.Operation temperature ranges from -40°C~150°C TJ.In this part, there are 16 terminations available.The voltage can applied to the load at the rate of 2.7V~10.8V.I would like to remind you that this amplifier should be operated at 5V.Ideally, it should be mounted in the Surface Mountposition.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.As a result of the DRV8833part number, it can be found.A device with 16pins is available.Drivers controllers belongs to the series [0].The number of outputs available is [0].A supply voltage of 10.8V is required for the operation of this driver.This device offers a maximum degree of design flexibility due to its 500mAoutput current.Its maximum output current reaches 2Ato meet the operational requirements.
DRV8833PWR Features
Applications : DC Motors, General Purpose, Solenoids
Load voltage across the chip 2.7V~10.8V
base on DRV8833 number
designed with 2 outputs
DRV8833PWR Applications
There are a lot of Texas Instruments DRV8833PWR motor drivers applications.
- Matrix LED dimmers
- Fog lamps
- Mobile phone display backlight and key light driving
- A cross between entertainment
- Daytime running lights (DRLs)
- Running preventive- maintenance diagnostics
- Large format LED backlighting
- parking lights
- High brightness LED lighting
- Hospitality buildings
