DRV8833RTYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Solenoids |
| Subcategory | Motion Control Electronics |
| Technology | NMOS |
| Voltage - Supply | 2.7V~10.8V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8833 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Max Output Current | 2A |
| Operating Supply Voltage | 10.8V |
| Power Supplies | 3/10V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 3mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 1.5A |
| Voltage - Load | 2.7V~10.8V |
| RMS Current (Irms) | 1.5A |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8833RTYR Description
The DRV8833RTYR provides a dual bridge motor driver solution for toys, printers, and other mechatronic applications. The DRV8833RTYR has two H-bridge drivers and can drive two DC brush motors, a bipolar stepper motor, solenoids, or other inductive loads. The output driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H bridge includes circuitry to regulator limit the winding current. With proper PCB design, each H-bridge of the DRV8833RTYR is capableofdrivingupto1.5-ARM (orDC) continuously, at 25°C with a VMsupply of 5 V. It can support peak currents of up to 2A per bridge. Current capability is reduced slightly at lower VM voltages. Internal shutdown functions with a fault output pin are provided for over-current protection, short circuit protection, voltage lockout, and overtemperature. A low-power sleep mode is also provided. The DRV8833RTYR is packaged in a 16-pin HTSSOP or QFN package with Power PAD?(Eco-friendly: RoHS&noSb/Br)
DRV8833RTYR Features
Dual-H-Bridge Current-Control Motor Driver
-Capable of Driving Two DC Motors or One Stepper Motor
- Low MOSFET On-Resistance: HS+LS360mQ
Output Current 1.5-A RMS, 2-A Peak per H-Bridge (at VM= 5 V, 25°C)
Outputs Can Be Paralleled for 3-A RMS, 4-A Peak
Wide Power Supply Voltage Range: 2.7 V- 10.8 V
PWM Winding Current Regulation/Limiting
Thermally Enhanced Surface Mount Package
DRV8833RTYR Applications
Battery-Powered Toys
POS Printers
Video Security Cameras
Office Automation Machines
Gaming Machines
Robotics
