DRV8834PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 2.5V~10.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8834 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Operating Supply Voltage | 10.8V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 2.4mA |
| Output Configuration | Half Bridge (4) |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 10.8V |
| Max Collector Current | 1.5A |
| Voltage - Load | 2.5V~10.8V |
| Switching Frequency | 42.5kHz |
| Drain to Source Resistance | 305mOhm |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/32 |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8834PWP Overview
This package was designed with Tubein mind.This part is packed in a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad case.In most cases, it is recommended to mount the part at Surface Mount.The component connected in General Purposeis compatible with it.There is a capability for the device to provide 2.5V~10.8V volts.There is a temperature range of -40°C~150°C TJin which this device operates.The motor type can be classified as Brushed DC.This part offers 24terminations.In this case, the voltage can be applied to the load at the rate of 2.5V~10.8V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.A Surface Mountmounting method is recommended for this product.The device employs the BRUSH DC MOTOR CONTROLLER analog IC.According to the DRV8834part number, the part is found.24pins are available on the device.Drivers controllers is a part of the Motion Control Electronics series.Drivers controllers is possible to access 2outputs.A voltage of 10.8V is used as the supply voltage for this driver.Continually maintains the output voltage at 500mV.Stepperrepresents the motor type.For its operation, a supply current of 2.4mAis used.
DRV8834PWP Features
Applications : General Purpose
Load voltage across the chip 2.5V~10.8V
base on DRV8834 number
designed with 2 outputs
Motor Type classified as Stepper
DRV8834PWP Applications
There are a lot of Texas Instruments DRV8834PWP motor drivers applications.
- General lighting
- Lighting for the ambience of tunability
- LED bias
- Automotive exterior and interior lighting
- Industrial high-bay lights
- Tail lights
- Dash
- Horticultural applications
- LCD displays
- Industrial lighting
