DRV8834PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 2.5V~10.8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8834 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 10.8V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.5A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 4mA |
| Voltage - Load | 2.5V~10.8V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/32 |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8834PWPR Overview
The design includes a package of type [0].Drivers controllers is packaged wDrivers controllersh a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad case.Mounting the part by Surface Mountis recommended.For the component connected to [0], it is suitable.2.5V~10.8V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of -40°C~150°C TJdegrees Celsius.This motor type can be categorized as Brushed DC.A total of 24terminations are available in the part.Drivers controllers is possible to apply voltage to the load at the rate of 2.5V~10.8V.Drivers controllers is recommended that this amplifier be run at 5V.There is a recommended mounting method of Surface Mount.Drivers controllers is recommended to keep the part output current at 1.5A.There is an analog integrated circuit BRUSH DC MOTOR CONTROLLERpresent in the device.Using the DRV8834part number, it is located.There are 24 pins on it.Drivers controllers is part of the series [0].The driver operates on a supply voltage of 10.8V volts.
DRV8834PWPR Features
Applications : General Purpose
Load voltage across the chip 2.5V~10.8V
base on DRV8834 number
DRV8834PWPR Applications
There are a lot of Texas Instruments DRV8834PWPR motor drivers applications.
- Architectural lighting
- Turn signals
- Lighting for the ambience of tunability
- RGB and monochromatic LED drivers for signage and traffic signals
- Display LED backlighting
- AM radio
- Large outdoor LED display
- Large format LED backlighting
- General lighting
- Horticultural lighting
