DRV8834RGER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 2.5V~10.8V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8834 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 10.8V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 4mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.5A |
| Voltage - Load | 2.5V~10.8V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/32 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8834RGER Overview
Drivers controllers is designed wDrivers controllersh a package of [0].The part is packaged in a 24-VFQFN Exposed Pad case.A mounting position of Surface Mountis recommended for the part.In this case, it is appropriate for the component connected to General Purpose.A device with a voltage range of 2.5V~10.8V volts is available.With regard to operating temperature, it ranges -40°C~150°C TJ. The motor type can be classified as Brushed DC.The part supports 24terminations.At a rate of [0], voltage can be applied to the load.Drivers controllers is recommended that this amplifier be run at 5V.The recommended mounting method is Surface Mount.The output current should be kept at 1.5A for the part.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.This can be determined by looking at the DRV8834 part number.24pins are available on the device.Drivers controllers is a part of the Motion Control Electronics series.A supply voltage of 10.8Vis required to operate this driver.
DRV8834RGER Features
Applications : General Purpose
Load voltage across the chip 2.5V~10.8V
base on DRV8834 number
DRV8834RGER Applications
There are a lot of Texas Instruments DRV8834RGER motor drivers applications.
- Display LED backlighting
- Footwell lighting
- LCD displays
- Industrial high-bay lights
- Hazardous application
- Handheld devices
- Alternative to HID lights
- Daytime running lights (DRLs)
- RGB and monochromatic LED drivers for signage and traffic signals
- Large format LED backlighting
