DRV8834RGET
| Parameters | |
|---|---|
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 2.4mA |
| Output Configuration | Half Bridge (4) |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 10.8V |
| Max Collector Current | 1.5A |
| Voltage - Load | 2.5V~10.8V |
| Switching Frequency | 42.5kHz |
| Drain to Source Resistance | 305mOhm |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/32 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Weight | 54.601182mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 2.5V~10.8V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8834 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Operating Supply Voltage | 10.8V |
DRV8834RGET Overview
This package was designed with Tape & Reel (TR)in mind.24-VFQFN Exposed Padcases are included with the part.In general, it is recommended that the part be mounted by Surface Mount.The component connected in General Purposeis compatible with it.There is a possibility of providing 2.5V~10.8Vvolts through the device.This device operates at a temperature range of -40°C~150°C TJ.Drivers controllers is possible to categorize the motor type as Brushed DC.There are 24 terminations available on this part.You can apply voltage at 2.5V~10.8Vto the load.In order to get the best performance from this amplifier, it should be run at 5V.Its recommended mounting way is Surface Mount.An analog IC with the model number BRUSH DC MOTOR CONTROLLERis employed in the device.Using the DRV8834part number, it is located.There are 24 pins on it.The Motion Control Electronicsseries contains it.There are a total of 2outputs available.Drivers controllers operates from a voltage of 10.8V volts.Drivers controllers is possible to recognize the motor type as [0].In order to operate it, 2.4mAsupply current is used.
DRV8834RGET Features
Applications : General Purpose
Load voltage across the chip 2.5V~10.8V
base on DRV8834 number
designed with 2 outputs
Motor Type classified as Stepper
DRV8834RGET Applications
There are a lot of Texas Instruments DRV8834RGET motor drivers applications.
- Indicator circuit
- Automotive instrumentation
- Street lights
- Landscape lighting
- parking lights
- Automotive exterior and interior lighting
- Lighting for the ambience of tunability
- Display LED backlighting
- Industrial high-bay lights
- Camcorders
