DRV8835DSSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Battery Powered |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 2V~7V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8835 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 11V |
| Supply Voltage-Max (Vsup) | 7V |
| Power Supplies | 35V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 1.5A |
| Output Configuration | Half Bridge (4) |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 11V |
| Max Collector Current | 1.5A |
| Voltage - Load | 0V~11V |
| Switching Frequency | 250kHz |
| Drain to Source Resistance | 305mOhm |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 800μm |
| Length | 2mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8835DSSR Description
For cameras, consumer items, toys, and other low-voltage or battery-powered motion control applications, the DRV8835DSSR provides an integrated motor driver solution. The device includes two H-bridge drivers that can drive two DC motors or one stepper motor, as well as additional devices such as solenoids. To drive the motor winding, each output driver block consists of N-channel power MOSFETs structured as an H-bridge. Gate drive voltages are generated by an internal charge pump.
The DRV8835DSSR has a maximum output current of 1.5 A per H-bridge. It has a motor power supply voltage of 2 to 11 volts and a device power supply voltage of 2 to 7 volts.
It is possible to pick PHASE/ENABLE and IN/IN interfaces that are compatible with industry-standard devices. Over-current protection, short circuit protection, under-voltage lockout, and overtemperature protection are all built-in.
The DRV8835DSSR is housed in a 12-pin WSON package with PowerPADTM (RoHS compliant and free of Sb/Br).
DRV8835DSSR Features
? Motor Driver with Dual H-Bridges
- Two DC motors or one stepper motor can be driven
? Low On-Resistance MOSFET: HS + LS 305 mΩ
? Maximum Drive Current Per H-Bridge: 1.5 A
? For 3-A Drive Current, Bridges Can Be Paralleled
? Motor Operating Supply Voltage Range: 2-V to 11-V
? Logic and Motor Power Supply Pins are Separate
? PWM or PHASE/ENABLE Interface Flexibility
? 95-nA maximum supply current in low-power sleep mode
? WSON Package: 2-mm x 3-mm
DRV8835DSSR Applications
? Battery-Powered:
– Cameras
– DSLR Lenses
– Consumer Products
– Toys
– Robotics
– Medical Devices
