DRV8837DSGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Integrated Circuit (IC) |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Solenoids |
| Subcategory | Motion Control Electronics |
| Technology | NMOS |
| Voltage - Supply | 1.8V~7V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8837 |
| Number of Outputs | 2 |
| Max Output Current | 1.8A |
| Supply Voltage-Max (Vsup) | 7V |
| Power Supplies | 35V |
| Interface | PWM |
| Nominal Supply Current | 300μA |
| Output Configuration | Half Bridge (2) |
| Output Current | 1.8A |
| Supply Current-Max (Isup) | 1.5mA |
| Voltage - Load | 0V~11V |
| Fault Protection | Over Temperature, Short Circuit |
| Max Junction Temperature (Tj) | 150°C |
| Motor Type | Brushed |
| Ambient Temperature Range High | 85°C |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8837DSGR Description
The DRV8837DSGR provides an integrated motor driver solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications.
The DRV8837DSGR IC can control one dc motor as well as additional devices such as solenoids. To drive the motor winding, the DRV8837DSGR block output consists of N-channel power MOSFETs configured as an H-bridge. Gate drive voltages are generated by an internal charge pump.
The DRV8837DSGR has a maximum output current of 1.8 A. A motor power supply voltage of 0 to 11 V and a device power supply voltage of 1.8 V to 7 V is used by the DRV8837DSGR motor driver.
DRV8837DSGR Features
H-Bridge Motor Driver
Drives a DC Motor or Other Loads
Low MOSFET On-Resistance: HS + LS 280 mΩ
1.8-A Maximum Drive Current
Separate Motor and Logic Supply Pins:
Motor VM: 0 to 11 V
Logic VCC: 1.8 to 7 V
PWM or PH-EN Interface
DRV8837: PWM, IN1, and IN2
DRV8838: PH and EN
Low-Power Sleep Mode With 120-nA Maximum Sleep Current
nSLEEP pin
Small Package and Footprint
8-Pin WSON With Thermal Pad
2.0 × 2.0 mm
Protection Features
VCC Undervoltage Lockout (UVLO)
Overcurrent Protection (OCP)
Thermal Shutdown (TSD)
DRV8837DSGR Applications
Cameras
DSLR Lenses
Toys
Robotics
Consumer Products
Medical Devices
