DRV8841PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 8.2V~45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8841 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 3.3V |
| Supply Voltage-Min (Vsup) | 8.2V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 2.5A |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.75A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 8mA |
| Voltage - Load | 8.2V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8841PWPR Overview
This package was designed with Cut Tape (CT)in mind.The part is packaged in a 28-PowerTSSOP (0.173, 4.40mm Width) case.Drivers controllers is recommended that the part be mounted by Surface Mount.I believe it would be suitable for the component connected to General Purpose.8.2V~45V volts can be supplied by the device.Operation temperature ranges from -40°C~150°C TJ.There is a motor type Brushed DCassociated with this motor type.The part supports 28terminations.Drivers controllers is possible to apply voltage at a rate of 8.2V~45Vto the load.Drivers controllers is important to note that this amplifier should be operated at the 24Vsetting.The recommended mounting method is Surface Mount.Drivers controllers is recommended to keep the part output current at 1.75A.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.The DRV8841part number is used to locate the part.Drivers controllers is designed wDrivers controllersh 28 pins.In the Motion Control Electronicsseries, it is included.4outputs are available in total.The output voltage is maintained at 3.3V.
DRV8841PWPR Features
Applications : General Purpose
Load voltage across the chip 8.2V~45V
base on DRV8841 number
designed with 4 outputs
DRV8841PWPR Applications
There are a lot of Texas Instruments DRV8841PWPR motor drivers applications.
- Lighting for health and wellbeing
- LED bias
- LED ballasts
- Fog lamps
- Handheld devices
- Hazardous application
- High brightness LED lighting
- Street lights
- Large outdoor LED display
- Large format LED backlighting
