DRV8842PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 120.003531mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 8.2V~45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8842 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Supply Voltage-Min (Vsup) | 8.2V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Operating Supply Current | 5mA |
| Output Configuration | Half Bridge (2) |
| Logic Function | AND, Inverter |
| Output Current-Max | 5A |
| Supply Current-Max (Isup) | 8mA |
| Collector Emitter Voltage (VCEO) | 45V |
| Max Collector Current | 3.5A |
| Voltage - Load | 8.2V~45V |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Switching Frequency | 50kHz |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8842PWP Overview
Drivers controllers includes a Tubepackage.A 28-PowerTSSOP (0.173, 4.40mm Width)case is included with the part.A mounting position of Surface Mountis recommended for the part.The component connected in General Purposematches it perfectly.The device is capable of supplying a voltage of 8.2V~45V volts.With regard to operating temperature, it ranges -40°C~150°C TJ. Drivers controllers is possible to categorize the motor type as Brushed DC.A total of 28terminations are available in the part.Voltage can be applied at a rate of 8.2V~45V volts to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 24V.The recommended mounting method is Surface Mount.This device utilizes the STEPPER MOTOR CONTROLLERanalog integrated circuit.Based on the DRV8842part number, it is found.28pins are used in its design.The item belongs to the Motion Control Electronics series.There are 1 outputs available.In this case, the output voltage is kept at 3.3V volts.The motor type can be identified as Brushed.Controller ic uses 5mAas the supply current for Controller ics operation.
DRV8842PWP Features
Applications : General Purpose
Load voltage across the chip 8.2V~45V
base on DRV8842 number
designed with 1 outputs
Motor Type classified as Brushed
DRV8842PWP Applications
There are a lot of Texas Instruments DRV8842PWP motor drivers applications.
- Commercial office
- Accurate LED current matching
- CHMSL (center high-mount stop lamps)
- Architectural lighting
- parking lights
- Horticultural applications
- Running preventive- maintenance diagnostics
- RGB and monochromatic LED drivers for signage and traffic signals
- Human-centric lighting
- Handheld devices
