DRV8842PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 8.2V~45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8842 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 24V |
| Supply Voltage-Max (Vsup) | 45V |
| Power Supplies | 8.2/45V |
| Supply Voltage-Min (Vsup) | 8.2V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 5A |
| Output Configuration | Half Bridge (2) |
| Current - Output | 3.5A |
| Supply Current-Max (Isup) | 8mA |
| Voltage - Load | 8.2V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8842PWPR Overview
This package is designed to work with [0].A 28-PowerTSSOP (0.173, 4.40mm Width)case is included with the part.The part should be mounted by Surface Mount.This component is suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 8.2V~45V volts.A range of -40°C~150°C TJis available for operating temperature.This motor type can be categorized as Brushed DC.The part has 28terminations available.In this case, the voltage can be applied to the load at the rate of 8.2V~45V.In order to get the best performance from this amplifier, it should be run at 24V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Keep the part output current at 3.5A.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.The DRV8842part number is used to locate the part.In this device, there are 28 pins.The item belongs to the Motion Control Electronics series.There are 1 outputs available.The output voltage is maintained at 24V.
DRV8842PWPR Features
Applications : General Purpose
Load voltage across the chip 8.2V~45V
base on DRV8842 number
designed with 1 outputs
DRV8842PWPR Applications
There are a lot of Texas Instruments DRV8842PWPR motor drivers applications.
- Street lights
- LED ballasts
- RGB and monochromatic LED drivers for signage and traffic signals
- Alternative to HID lights
- Scanning equipment
- PWM generators
- Commercial office
- Fog lamps
- Landscape lighting
- Large format LED backlighting
