DRV8843PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 8.2V~45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8843 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 3.3V |
| Supply Voltage-Min (Vsup) | 8.2V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 5mA |
| Output Configuration | Half Bridge (4) |
| Output Current-Max | 2.5A |
| Supply Current-Max (Isup) | 8mA |
| Collector Emitter Voltage (VCEO) | 45V |
| Max Collector Current | 1.75A |
| Voltage - Load | 8.2V~45V |
| Switching Frequency | 50kHz |
| Motor Type | Stepper |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8843PWP Overview
Drivers controllers is designed with Tube package.The part is packaged in a 28-PowerTSSOP (0.173, 4.40mm Width) case.A mounting position of Surface Mountis recommended for the part.For the component connected to [0], it is suitable.In this case, the device can supply 8.2V~45V volts.With regard to operating temperature, it ranges -40°C~150°C TJ. Motors can be classified as Brushed DC.This part has 28termination options.Drivers controllers is possible to apply voltage to the load at the rate of 8.2V~45V.Drivers controllers is important to remember that this amplifier should be run at 24V.The recommended way to mount it is Surface Mount.In this device, the analog IC BRUSH DC MOTOR CONTROLLERis employed.This can be determined by looking at the DRV8843 part number.There are 28 pins on it.The Motion Control Electronicsseries includes this item.4outputs are available.Continually maintains the output voltage at 3.3V.Steppercan be recognized as a motor type.
DRV8843PWP Features
Applications : General Purpose
Load voltage across the chip 8.2V~45V
base on DRV8843 number
designed with 4 outputs
Motor Type classified as Stepper
DRV8843PWP Applications
There are a lot of Texas Instruments DRV8843PWP motor drivers applications.
- Arena lighting
- Charge pump circuits
- Scanning equipment
- Alternative to HID lights
- Side marker lights
- Indicator circuit
- Running preventive- maintenance diagnostics
- Camera-enabled smartphones
- Indicator
- Infotainment backlighting
