DRV8844PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 8V~60V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8844 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Interface | Parallel |
| Nominal Supply Current | 1mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.75A |
| Output Characteristics | TOTEM-POLE |
| Collector Emitter Voltage (VCEO) | 60V |
| Max Collector Current | 3.5A |
| Output Polarity | TRUE |
| Voltage - Load | 8V~60V |
| Number of Drivers | 2 |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 0.5 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Motor Type | Stepper |
| Ambient Temperature Range High | 125°C |
| Output Current Flow Direction | SOURCE SINK |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8844PWP Overview
The package is designed with [0].This part is packed in a 28-PowerTSSOP (0.173, 4.40mm Width) case.Mounting the part by Surface Mountis recommended.I believe it is suitable for the component connected to General Purpose.There is a possibility of providing 8V~60Vvolts through the device.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.Drivers controllers is possible to categorize the motor type as Brushed DC.This part provides 28terminations.In this case, the voltage can be applied to the load at the rate of 8V~60V.Please take in mind that this amplifier should be run at 24V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Drivers controllers is recommended to keep the part output current at 1.75A.The DRV8844part number allows us to locate it.This device is designed with a pin count of 28.The number of outputs available is [0].Steppercan be recognized as a motor type.Currently, it is equipped with 2 drivers.
DRV8844PWP Features
Applications : General Purpose
Load voltage across the chip 8V~60V
base on DRV8844 number
designed with 4 outputs
Motor Type classified as Stepper
with 2 Drivers
DRV8844PWP Applications
There are a lot of Texas Instruments DRV8844PWP motor drivers applications.
- Lighting for health and wellbeing
- Automotive exterior and interior lighting
- A cross between entertainment
- Footwell lighting
- High power LED street light
- Indicator
- Mobile phone display backlight and key light driving
- High brightness LED lighting
- Horticultural applications
- CHMSL (center high-mount stop lamps)
