DRV8844PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 8V~60V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8844 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Interface | Parallel |
| Nominal Supply Current | 1mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.75A |
| Logic Function | AND |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 150ns |
| Fall Time (Typ) | 150 ns |
| Output Polarity | TRUE |
| Voltage - Load | 8V~60V |
| Number of Drivers | 4 |
| Turn Off Time | 0.5 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8844PWPR Overview
The design includes a package of type [0].Drivers controllers comes in a 28-PowerTSSOP (0.173, 4.40mm Width) case.The part should be mounted by Surface Mount.I believe it would be suitable for the component connected to General Purpose.8V~60V volts can be supplied by the device.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.There is a motor type Brushed DCavailable.This part has 28termination options.If the voltage is applied to the load at the rate of [0], the load will be affected.In order to get the best performance from this amplifier, it should be run at 24V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Ensure that the part output current remains at 1.75A.Drivers controllers is based on the DRV8844 part number.There are 28 pins on it.There are 4drivers installed in it.
DRV8844PWPR Features
Applications : General Purpose
Load voltage across the chip 8V~60V
base on DRV8844 number
with 4 Drivers
DRV8844PWPR Applications
There are a lot of Texas Instruments DRV8844PWPR motor drivers applications.
- Mobile phone display backlight and key light driving
- Horticultural lighting
- Outdoor area lights
- Street lights
- LED ballasts
- PDAs
- Camcorders
- Infotainment backlighting
- Commercial office
- High power LED street light
