DRV8848PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 4V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | DRV8848 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 1mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 4A |
| Output Current per Channel | 1A |
| Supply Current-Max (Isup) | 5.5mA |
| Voltage - Load | 4V~18V |
| Fault Protection | Over Temperature, Short Circuit |
| Drain to Source Resistance | 900mOhm |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8848PWP Overview
This package was designed with Tubein mind.16-PowerTSSOP (0.173, 4.40mm Width)cases are included with the part.A mounting position of Surface Mountis recommended for the part.As a result, it is appropriate for the component connected to DC Motors, General Purpose.The device is capable of supplying a voltage of 4V~18V volts.Operation temperature ranges from -40°C~150°C TJ.There is a motor type Brushed DCavailable.The part supports 16terminations.Drivers controllers is possible to apply voltage to the load at the rate of 4V~18V.In order to get the best performance from this amplifier, it should be run at 5V.A Surface Mountmounting method is recommended for this product.Set the part's output current to 4A.There is an analog integrated circuit BRUSH DC MOTOR CONTROLLERpresent in the device.DRV8848is the part number that finds it.The device has 16 pins.Currently, there are 2 outputs available.1mAis the supply current used for its operation.
DRV8848PWP Features
Applications : DC Motors, General Purpose
Load voltage across the chip 4V~18V
base on DRV8848 number
designed with 2 outputs
DRV8848PWP Applications
There are a lot of Texas Instruments DRV8848PWP motor drivers applications.
- Automotive exterior and interior lighting
- Industrial lighting
- CHMSL (center high-mount stop lamps)
- Fog lamps
- Lighting for the ambience of tunability
- PWM generators
- Multiple output capability
- Landscape lighting
- Camcorders
- Outdoor area lights
