DRV8850RGYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Weight | 54.601182mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Integrated Circuit (IC) |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Solenoids |
| Subcategory | Motion Control Electronics |
| Technology | NMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 50kHz |
| Base Part Number | DRV8850 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Max Output Current | 8A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 4.2V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | Logic |
| Operating Supply Current | 2.9mA |
| Output Configuration | Half Bridge |
| Output Current per Channel | 5A |
| Voltage - Load | 2V~5.5V |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit |
| Drain to Source Resistance | 65mOhm |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Unipolar |
| Height | 1mm |
| Length | 5.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8850RGYR Overview
Drivers controllers is designed wDrivers controllersh a package of [0].This part is packaged with a case of [0].Drivers controllers is recommended to mount the part by Surface Mount.For the component connected to [0], it is suitable.Drivers controllers is capable of supplying 2V~5.5V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.The motor type can be classified as Brushed DC.A total of 24terminations are available in this part.You can apply voltage at 2V~5.5Vto the load.Please take in mind that this amplifier should be run at 4.2V.There is Surface Mount recommended mounting method for this device.The DRV8850part number is used to locate the part.24pins are present on the device.The Motion Control Electronicsseries contains it.There are 1 outputs available.In order to meet operation requirements, its maximum output current reaches [0].The supply current used for its operating is 2.9mA.This frequency can be achieved at 50kHz.
DRV8850RGYR Features
Applications : DC Motors, General Purpose, Solenoids
Load voltage across the chip 2V~5.5V
base on DRV8850 number
designed with 1 outputs
DRV8850RGYR Applications
There are a lot of Texas Instruments DRV8850RGYR motor drivers applications.
- A cross between entertainment
- Footwell lighting
- Infotainment backlighting
- Scanning equipment
- Human-centric lighting
- Camera-enabled smartphones
- Handheld devices
- Step-up or step-down driver topologies
- High brightness LED lighting
- parking lights
