DRV8870DDA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Stepper Motors |
| Technology | NMOS |
| Voltage - Supply | 0V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DRV8870 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 45V |
| Supply Voltage-Min (Vsup) | 6.5V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Current - Output | 3.6A |
| Supply Current-Max (Isup) | 10mA |
| Voltage - Load | 6.5V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Unipolar |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8870DDA Overview
This package was designed with Tubein mind.The part is packged with 8-PowerSOIC (0.154, 3.90mm Width) case.Ideally, the part should be mounted by Surface Mount.As a result, it is appropriate for the component connected to DC Motors, General Purpose, Stepper Motors.In this case, the device can supply 0V~5.5V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.Motors can be classified as Brushed DC.This part offers 8terminations.In this case, the voltage can be applied to the load at the rate of 6.5V~45V.Drivers controllers is important to note that this amplifier should be operated at the 12Vsetting.Ideally, it should be mounted in the Surface Mountposition.Maintain a current of 3.6Afor the part output.This device utilizes the BRUSH DC MOTOR CONTROLLERanalog integrated circuit.As a result of the DRV8870part number, it can be found.8pins are available on the device.A supply voltage of 45V is required for the operation of this driver.
DRV8870DDA Features
Applications : DC Motors, General Purpose, Stepper Motors
Load voltage across the chip 6.5V~45V
base on DRV8870 number
DRV8870DDA Applications
There are a lot of Texas Instruments DRV8870DDA motor drivers applications.
- High power LED street light
- Fog lamps
- PDAs
- Large format LED backlighting
- Architectural lighting
- RGB and monochromatic LED drivers for signage and traffic signals
- Tail lights
- Running preventive- maintenance diagnostics
- A cross between entertainment
- Daytime running lights (DRLs)
