DRV8876PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Stepper Motors |
| Technology | NMOS |
| Voltage - Supply | 0V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8876 |
| JESD-30 Code | R-PDSO-G16 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 37V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Current - Output | 3.5A |
| Voltage - Load | 4.5V~37V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Unipolar |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
DRV8876PWPR Description
DRV8876PWPR is a flexible motor driver for a wide variety of applications.The device integrates an N-channel H-bridge, charge pump regulator,current sensing and regulation, current proportional output, and protection circuitry. The charge pump improves efficiency by allowing for both high-side and low-side N-channels MOSFETs and 100% duty cycle support. DRV8876PWPR comes in pin-to-pin, scalable RDS(on) options to support different loads with minimal design changes.
Integrated current sensing allows for the driver to regulate the motor current during start up and high load events. A current limit can beset with an adjustable external voltage reference. Additionally, it provides an output current proportional to the motor load current. This can be used to detect motor stall or change in load conditions. The integrated current sensing uses an internal current mirror architecture,removing the need for a large power shunt resistor, saving board area and reducing system cost.
DRV8876PWPR Features
N-channel H-bridge motor driver
4.5-V to 37-V operating supply voltage range
Pin to pin RDS(on)?variants: DRV8876: 700-mΩ (High-Side +Low-Side)
High output current capability: DRV8876: 3.5-APeak
Integrated current sensing and regulation
Proportional current output (IPROPI)
DRV8876PWPR Applications
? Brushed DC motors
? Major and small home appliances
? Vacuum, humanoid, and toy robotics
? Printers and scanners
? Smart meters
? ATMs, currency counters, and EPOS
? Servo motors and actuators
DRV8876PWPR is a flexible motor driver for a wide variety of applications.The device integrates an N-channel H-bridge, charge pump regulator,current sensing and regulation, current proportional output, and protection circuitry. The charge pump improves efficiency by allowing for both high-side and low-side N-channels MOSFETs and 100% duty cycle support. DRV8876PWPR comes in pin-to-pin, scalable RDS(on) options to support different loads with minimal design changes.
Integrated current sensing allows for the driver to regulate the motor current during start up and high load events. A current limit can beset with an adjustable external voltage reference. Additionally, it provides an output current proportional to the motor load current. This can be used to detect motor stall or change in load conditions. The integrated current sensing uses an internal current mirror architecture,removing the need for a large power shunt resistor, saving board area and reducing system cost.
DRV8876PWPR Features
N-channel H-bridge motor driver
4.5-V to 37-V operating supply voltage range
Pin to pin RDS(on)?variants: DRV8876: 700-mΩ (High-Side +Low-Side)
High output current capability: DRV8876: 3.5-APeak
Integrated current sensing and regulation
Proportional current output (IPROPI)
DRV8876PWPR Applications
? Brushed DC motors
? Major and small home appliances
? Vacuum, humanoid, and toy robotics
? Printers and scanners
? Smart meters
? ATMs, currency counters, and EPOS
? Servo motors and actuators
