banner_page

DS1075Z-80

5V 50MHz Oscillator, Fixed Frequency (Dual) Programmable Timers EconOscillator? Series DS1075 8 Pins 80MHz 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1075Z-80
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 533
  • Description: 5V 50MHz Oscillator, Fixed Frequency (Dual) Programmable Timers EconOscillator? Series DS1075 8 Pins 80MHz 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Number of Terminations 8
ECCN Code EAR99
Type Oscillator, Fixed Frequency (Dual)
Terminal Finish Tin/Lead (Sn/Pb)
HTS Code 8542.39.00.01
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 245
Supply Voltage 5V
Terminal Pitch 1.27mm
Reach Compliance Code not_compliant
Frequency 80MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number DS1075
Pin Count 8
JESD-30 Code R-PDSO-G8
Qualification Status Not Qualified
Operating Supply Current 35mA
Load Capacitance 15pF
Frequency Tolerance 0.5%
Primary Clock/Crystal Frequency-Nom 50MHz
Height Seated (Max) 1.75mm
Length 4.9mm
Width 3.9mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Operating Temperature 0°C~70°C
Packaging Tube
Published 1999
Series EconOscillator™
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)

DS1075Z-80 Overview


There is a 8-SOIC (0.154, 3.90mm Width) enclosure with the programmable timer. In this case, the programmable timer's frequency is set to 80MHz.It is used to pack in Tube case. It is recommended that you use mounting type Surface Mount.4.75V~5.25V can be supplied as a voltage by the programmable timer.The type of chips can be divided into Oscillator, Fixed Frequency (Dual). The operating temperature of this timer clock is 0°C~70°C. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 35mA voltage. The EconOscillator? relates to the digital timer's series. It is based on DS1075. The supply voltage of the programmable timer can rate 5V. The digital timer has a frequency tolerance value of 0.5%. The sum of the IC chip pins is 8 . The number of the chip's terminations sums up to 8.

DS1075Z-80 Features


Operate frequency at 80MHz
Package / Case: Tube
Mounting Type:Surface Mount

DS1075Z-80 Applications


There are a lot of Maxim Integrated DS1075Z-80 Programmable Timers & Oscillators applications.

  • Thermostats
  • Precision timing
  • Smart Key
  • Intruder Detection
  • High Vibration, High Acceleration Environments
  • Battery-Powered Systems
  • Remote Sensors
  • Motor control
  • Power-Gating Applications
  • Home Automation Sensors

Write a review

Note: HTML is not translated!
    Bad           Good