banner_page

DS1080LU+

3.3V Crystal Multiplier, Spread Spectrum Clock Generator DS1080L Clock Generators 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 3V~3.6V Tube


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1080LU+
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 823
  • Description: 3.3V Crystal Multiplier, Spread Spectrum Clock Generator DS1080L Clock Generators 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 3V~3.6V Tube (Kg)

Details

Tags

Parameters
Height 950μm
Length 3.1mm
Width 3.1mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
Published 2011
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Crystal Multiplier, Spread Spectrum Clock Generator
Terminal Finish Matte Tin (Sn)
Subcategory Clock Generators
Voltage - Supply 3V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 134MHz
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number DS1080L
Output LVCMOS
Pin Count 8
Power Supplies 3.3V
Number of Circuits 1
Operating Supply Current 13mA
Nominal Supply Current 13mA
Max Supply Current 15mA
Input Clock, Crystal
Ratio - Input:Output 1:1
Primary Clock/Crystal Frequency-Nom 33.4MHz
PLL Yes
Differential - Input:Output No/No
Max Duty Cycle 60 %
Divider/Multiplier No/Yes

DS1080LU+ Overview


As a clock IC, PLLs is packaged using the Tube method. The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package embeds this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. As you can see, it consists of 8 terminations. Clock generator ics require a voltage of 3.3V. This clock generator receives its inputs from Clock, Crystal, which is designed to be the clock source. It is possible to access the full performance of the electrical part by implementing 1 circuits. Surface Mount-slots make it easy to mount this electronic component on panels. Clock PLL works with 3V~3.6V supply voltage provided. The temperature should be set at -40°C~125°C to ensure reliable performance. The frequency synthesizer in this product is compatible with all levels of LVCMOS logic. Crystal Multiplier, Spread Spectrum Clock Generator is the type of electrical part that this component is classified as. It is a 8-bit clock PLL designed specifically for microprocessors. This part number DS1080L is related to the following electrical components. The clock PLL has 8 pins that are available. The device is usually classified as a type of Clock Generators device. High efficiency is achieved when operating at a frequency of 134MHz. For the time clock generator to operate properly, 13mA of supply current are required. During these clock generator operations, the maximum current supplied reaches 15mA.

DS1080LU+ Features


Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V

DS1080LU+ Applications


There are a lot of Maxim Integrated DS1080LU+ Clock Generators applications.

  • Test and instrumentation equipment
  • High-frequency induction heating
  • Communication infrastructure
  • Jitter reduction
  • Deep space exploration
  • Fiber Channel
  • HDD recorders
  • 1 Gigabit Ethernet
  • High-speed communication applications
  • Multiplexing communication

Write a review

Note: HTML is not translated!
    Bad           Good