banner_page

DS1086U-266+

5V Spread Spectrum Clock Generator 66MHz DS1086 Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 4.75V~5.25V Tube


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1086U-266+
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 388
  • Description: 5V Spread Spectrum Clock Generator 66MHz DS1086 Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 4.75V~5.25V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
Published 2002
Series EconOscillator™
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination SMD/SMT
ECCN Code EAR99
Type Spread Spectrum Clock Generator
Terminal Finish Matte Tin (Sn)
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 5V
Terminal Pitch 0.65mm
Frequency 133MHz
Base Part Number DS1086
Pin Count 8
Operating Supply Voltage 5V
Number of Circuits 1
Load Capacitance 50pF
Frequency (Max) 66MHz
Input Clock
Ratio - Input:Output 1:1
PLL No
Differential - Input:Output No/No
Max Duty Cycle 60 %
Divider/Multiplier Yes/No
Length 3mm
Width 3mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

DS1086U-266+ Overview


Clock generator is packaged in the way of Tube. The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package contains this clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. It contains 8 terminations that can be found in frequency synthesizer. A voltage of 5V should be applied to this electronic frequency generator. This Clock PLL will be fed by Clock as its input. For a full understanding of the electronic part's performance, 1 circuits are implemented. Providing a maximum frequency of 66MHz, this clock-based RF synthesizer is suitable for a variety of applications. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock generator ic works with 4.75V~5.25V. Based on test statistics, ambient temperature should be set at 0°C~70°C. It is possible to classify this electronic component as a Spread Spectrum Clock Generator. The clock-generating IC is a 8-bit device designed specifically for microprocessors. The related electrical components for the base part number DS1086 can be found below. There are 8 pins on the frequency generator that are available for use. Clock PLL is capable of handling a voltage of 5V. There are a number of electronic parts in the EconOscillator? series, including this one. At a frequency of 133MHz, the system can achieve high efficiency. Analog clock generator is capable of delivering a load capacitance of 50pF.

DS1086U-266+ Features


Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 5V
Operating supply voltage of 5V
Load capacitance of 50pF

DS1086U-266+ Applications


There are a lot of Maxim Integrated DS1086U-266+ Clock Generators applications.

  • Antenna automatic tracking
  • Multiplexing communication
  • Main oscillator in receiver
  • Microwave point-to-point systems
  • Test equipment
  • High-speed communication applications
  • Laptops
  • Wi-Fi routers
  • Cell phones
  • GPS systems

Write a review

Note: HTML is not translated!
    Bad           Good