banner_page

DS1088LU-02+

3.3V Clock Generator DS1088L Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 2.7V~3.6V Tube


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1088LU-02+
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 277
  • Description: 3.3V Clock Generator DS1088L Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 2.7V~3.6V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Operating Temperature -20°C~85°C
Packaging Tube
Published 2012
Series EconOscillator™
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Clock Generator
Terminal Finish Matte Tin (Sn)
Technology CMOS
Voltage - Supply 2.7V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Frequency 2.048MHz
Base Part Number DS1088L
Pin Count 8
JESD-30 Code S-PDSO-G8
Number of Circuits 1
Input Clock
Ratio - Input:Output 1:1
PLL No
Differential - Input:Output No/No
Divider/Multiplier Yes/No
Length 3mm
Width 3mm
RoHS Status ROHS3 Compliant

DS1088LU-02+ Overview


A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. Clock PLL is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are 8 terminations found in the file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. Clock is designed for clock generator's input. To access the full performance of the electronic component, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As long as you provide 2.7V~3.6V supply voltage, it will work. As determined by the test statistics, the ambient temperature should be set to -20°C~85°C. An electrical part such as this one can be classified as a Clock Generator component. In particular, this clock PLL is designed to be used with microprocessors. The related electrical components for the base part number DS1088L can be found below. This electronic part is a member of the EconOscillator? series. At 2.048MHz, frequency synthesizer achieves high efficiency.

DS1088LU-02+ Features


Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V

DS1088LU-02+ Applications


There are a lot of Maxim Integrated DS1088LU-02+ Clock Generators applications.

  • Multi-function printers
  • Frequency Modulation (FM) stereo decoders
  • Various decoding circuits
  • VSAT (Small Ground Satellite Station)
  • Microwave point-to-point systems
  • Microwave radio
  • Smartphones
  • Telecommunication systems
  • High-frequency induction heating
  • CB radios

Write a review

Note: HTML is not translated!
    Bad           Good