banner_page

DS1090U-1+

Clock Generator DS1090 Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 3V~5.5V Tube


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1090U-1+
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 182
  • Description: Clock Generator DS1090 Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 3V~5.5V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2012
Series EconOscillator™
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination SMD/SMT
ECCN Code EAR99
Type Clock Generator
Terminal Finish Matte Tin (Sn)
Voltage - Supply 3V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Terminal Pitch 0.65mm
Frequency 8MHz
Base Part Number DS1090
Output CMOS, TTL
Pin Count 8
Number of Circuits 1
Load Capacitance 30pF
Input Clock
Ratio - Input:Output 1:1
PLL No
Differential - Input:Output No/No
Max Duty Cycle 55 %
Divider/Multiplier Yes/No
Length 3mm
Width 3mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

DS1090U-1+ Overview


As a clock IC, PLLs is packaged using the Tube method. 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) contains this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As a result, frequency synthesizers can be found to contain 8 terminations. This Clock PLL will be fed by Clock as its input. Using 1 circuits, the electronic part's full performance can be accessed. With the Surface Mount, it is easy to install this electric component on the panel. This clock PLL works with a supply voltage of 3V~5.5V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. CMOS, TTL logic levels are supported by this RF synthesizer. It has been classified as a Clock Generator electronic part, which means that it is a semiconductor. It is a 8-bit clock PLL designed specifically for microprocessors. This part number is related to its related electronic parts. The frequency synthesizer has 8 pins that are available. There are a number of electronic parts in the EconOscillator? series, including this one. It is able to realize high efficiency when operating at a frequency of 8MHz. In order to obtain a load capacitance of 30pF, the PLL is capable of generating a large voltage.

DS1090U-1+ Features


Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Load capacitance of 30pF

DS1090U-1+ Applications


There are a lot of Maxim Integrated DS1090U-1+ Clock Generators applications.

  • Signal generator
  • Cellular/4G
  • Notebooks
  • Myriad digital applications
  • Wireless base station for LTE, LTE-advanced
  • Clock recovery
  • Closed circuit systems
  • Carrier synchronization in wired communication
  • Local oscillators (LOs)
  • Electronic countermeasures

Write a review

Note: HTML is not translated!
    Bad           Good