banner_page

DS1090U-16+

Clock Generator DS1090 Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 3V~5.5V Tube


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1090U-16+
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 199
  • Description: Clock Generator DS1090 Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 3V~5.5V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
Published 2010
Series EconOscillator™
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination SMD/SMT
ECCN Code EAR99
Type Clock Generator
Terminal Finish Matte Tin (Sn)
Voltage - Supply 3V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Terminal Pitch 0.65mm
Frequency 500kHz
Base Part Number DS1090
Output CMOS, TTL
Pin Count 8
Number of Circuits 1
Load Capacitance 30pF
Frequency Tolerance 3%
Input Clock
Ratio - Input:Output 1:1
PLL No
Differential - Input:Output No/No
Max Duty Cycle 55 %
Divider/Multiplier Yes/No
Height 950μm
Length 3.1mm
Width 3.1mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

DS1090U-16+ Overview


It is packaged using the Tube method since it is a clock IC. There is a clock generator embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 8 terminations can be found in frequency synthesizer. There is a Clock PLL called Clock which is designed to be the input to this clock generator. To access the electronic component's full performance, 1 circuits are implemented. Because of the Surface Mount, clock PLL can be easily mounted on the panel. As far as the supply voltage is concerned, clock PLL can be used with 3V~5.5V. Based on test statistics, ambient temperature should be set at -40°C~85°C. The RF synthesizer is compatible with CMOS, TTL logic levels. This is an electronic part that can be classified as a Clock Generator in this case. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. This part number is related to its related electronic parts. The frequency synthesizer has 8 pins that are available. This electronic part is a member of the EconOscillator? series. At a frequency of 500kHz, the system can achieve high efficiency. As a result, the load capacitance of this PLL is 30pF.

DS1090U-16+ Features


Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Load capacitance of 30pF

DS1090U-16+ Applications


There are a lot of Maxim Integrated DS1090U-16+ Clock Generators applications.

  • Smartphones
  • Telecommunication systems
  • Radiotelephones
  • Tracking filters
  • Modems
  • Carrier synchronization in wired communication
  • Cell phones
  • Automatic control
  • Peripheral devices
  • Electronic equipment

Write a review

Note: HTML is not translated!
    Bad           Good