Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
2010 |
Series |
EconOscillator™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Clock Generator |
Terminal Finish |
Matte Tin (Sn) |
Voltage - Supply |
3V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.65mm |
Frequency |
4MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
DS1090 |
Output |
CMOS, TTL |
Pin Count |
8 |
Number of Circuits |
1 |
Load Capacitance |
30pF |
Max Supply Current |
3mA |
Input |
Clock |
Ratio - Input:Output |
1:1 |
PLL |
No |
Differential - Input:Output |
No/No |
Max Duty Cycle |
50 % |
Divider/Multiplier |
Yes/No |
Height |
950μm |
Length |
3.1mm |
Width |
3.1mm |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DS1090U-2+ Overview
As a clock IC, PLLs is packaged using the Tube method. The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As a result, frequency synthesizers can be found to contain 8 terminations. In this case, Clock is designed to be the input of the clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. This component can be conveniently installed on the panel thanks to the Surface Mount. In terms of supply voltage, RF synthesizer works with 3V~5.5V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. The frequency synthesizer in this product is compatible with all levels of CMOS, TTL logic. It is possible to classify this electronic component as a Clock Generator. Microprocessor-specific clock PLL with 8 bits. According to the base part number, its related parts can be founded. There are 8 pins that are available on the clock PLL. This clock generator is a member of EconOscillator? series. By operating at a frequency of 4MHz, RF synthesizer is able to reali4MHze high efficiency. In this operation, a maximum current of 3mA is supplied to the clock generator. Time clock generator is capable of delivering a load capacitance of 30pF.
DS1090U-2+ Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Load capacitance of 30pF
DS1090U-2+ Applications
There are a lot of Maxim Integrated DS1090U-2+ Clock Generators applications.
- Precision auxiliary angle deflection measurement
- Line cards used in telephone exchange
- Mixed mode (analog and digital) applications
- Frequency Modulation (FM) stereo decoders
- Wireless base station for LTE, LTE-advanced
- Signal generator
- Microprocessor clock multipliers
- Jitter reduction
- 10 Gigabit Ethernet
- FM demodulation networks for FM operations