DS1091LUB-066+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Series | EconOscillator™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Spread Spectrum Clock Generator |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DS1091L |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 16mA |
| Frequency (Max) | 66.6MHz |
| Input | Clock |
| Ratio - Input:Output | 1:1 |
| PLL | No |
| Differential - Input:Output | No/No |
| Output Clock Frequency-Max | 66.6MHz |
| Divider/Multiplier | Yes/No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
DS1091LUB-066+ Overview
The Tube method is used for packaging clock ICs. The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As a result, frequency synthesizers can be found to contain 8 terminations. The clock generator ic should be grounded with a voltage of 3.3V. It is designed that the Clock PLL's input should be Clock. For full access to the electronic component's capabilities, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 66.6MHz Max. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Clock generators should operate with the voltage supply of 3V~3.6V. Statistics suggest that the ambient temperature be set at -40°C~125°C, which is what is estimated by the test. Synthesi66.6MHzing a clock output frequency of 66.6MHz is possible with this clock-generator. This is an electronic part that can be classified as a Spread Spectrum Clock Generator in this case. In particular, this clock PLL is designed to be used with microprocessors. The related electrical components for the base part number DS1091L can be found below. There are a number of 8 pins that are available on the clock generators. There is a maximum supply voltage of 3.3V that clock generator can handle. This clock generator is a member of EconOscillator? series. A supply current of 16mA needs to be provided to fully play RF synthesizer's function.
DS1091LUB-066+ Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V
Output clock frequency (Max) of 66.6MHz
Operating supply voltage of 3.3V
DS1091LUB-066+ Applications
There are a lot of Maxim Integrated DS1091LUB-066+ Clock Generators applications.
- VSAT (Small Ground Satellite Station)
- Telecommunication systems
- Wireless infrastructure
- Modems
- FSK demodulators
- HDD recorders
- Jitter reduction
- Aerospace and defense
- Automatic control system test
- Medical equipment
