banner_page

DS1099U-PR+

5V Clock Generator 127.9Hz 31.98Hz DS1099 Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 2.7V~5.5V Tube


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1099U-PR+
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 613
  • Description: 5V Clock Generator 127.9Hz 31.98Hz DS1099 Clock Generators EconOscillator? Series 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) 8 Terminals Surface Mount 2.7V~5.5V Tube (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
Published 2006
Series EconOscillator™
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination SMD/SMT
ECCN Code EAR99
Type Clock Generator
Terminal Finish Matte Tin (Sn)
Voltage - Supply 2.7V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 5V
Terminal Pitch 0.65mm
Frequency 127.9kHz
Base Part Number DS1099
Output CMOS, TTL
Pin Count 8
Number of Circuits 1
Frequency (Max) 127.9Hz 31.98Hz
Input Clock
Ratio - Input:Output 1:2
Primary Clock/Crystal Frequency-Nom 1MHz
PLL No
Differential - Input:Output No/No
Max Duty Cycle 55 %
Divider/Multiplier Yes/No
Length 3mm
Width 3mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

DS1099U-PR+ Overview


As a clock IC, it is packaged by the Tube method. As part of the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, this clock generator is embedded. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains a total of 8 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 5V. A clock generator's input is called Clock and it is designed as the input for this clock generator. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. This clock-based frequency generator provides a frequency up to 127.9Hz 31.98Hz Max. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock PLL works with 2.7V~5.5V supply voltage provided. Statistics suggest that the ambient temperature be set at -40°C~125°C, which is what is estimated by the test. The frequency synthesizer in this product is compatible with all levels of CMOS, TTL logic. A Clock Generator is a classification for the electronic part in question. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. The related electronic parts of part number DS1099 are listed below. There is a 8 pin that is available on the frequency synthesizers. There is an electronic part in this series that belongs to the EconOscillator? family. At a frequency of 127.9kHz, frequency generator is capable of achieving high efficiency.

DS1099U-PR+ Features


Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 5V

DS1099U-PR+ Applications


There are a lot of Maxim Integrated DS1099U-PR+ Clock Generators applications.

  • Time to digital converters
  • CPUs
  • Frequency shifting decodes
  • Myriad digital applications
  • Satellite navigation communication
  • Pagers
  • Digital switching systems
  • Melting
  • GPS systems
  • Skew suppression

Write a review

Note: HTML is not translated!
    Bad           Good