DS1231-20/G
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | DS1231 |
| Output | Open Drain or Open Collector |
| JESD-30 Code | R-PDIP-T8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2mA |
| Max Supply Current | 2mA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.74V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.74V |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
DS1231-20/G Overview
There are 8 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tube. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. A supply voltage of 5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Through Hole-axis. This power ic can be sub-categorized as Power Management Circuits. IC management can only work with a supply voltage of 4.5V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Through Hole mounting type. The supervisors should be set to the following temperature: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 2mA. It is always advisable to use DS1231, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 2mA can be used.
DS1231-20/G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
2mA operating supply current
DS1231-20/G Applications
There are a lot of Maxim Integrated DS1231-20/G Voltage Supervisors applications.
- Household appliances
- FPGA design
- Leakage current detection
- Smartphones
- Automotive power systems
- Digitally controlled LDO regulators circuit
- Sensitive sensors
- Medical-specific insulation monitor
- Electrical fire monitoring system
- Precision measurement
