banner_page

DS1231-35

5V8 Terminals 8-Pin DS1231 Voltage supervisor1 Channels Min 4.5V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1231-35
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 503
  • Description: 5V8 Terminals 8-Pin DS1231 Voltage supervisor1 Channels Min 4.5V Max 5.5V (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1998
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number DS1231
Output Open Drain or Open Collector
Pin Count 8
Operating Supply Voltage 5V
Power Supplies 5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Operating Supply Current 500μA
Max Supply Current 2mA
Adjustable Threshold NO
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 4.37V 4.62V
Number of Voltages Monitored 1
Reset Timeout 150ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.74V
Undervoltage Threshold 3.3V
Overvoltage Threshold 4.74V
Height Seated (Max) 4.572mm
Length 9.375mm
Width 7.62mm
REACH SVHC Unknown
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

DS1231-35 Overview


A total of 8 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tube. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts at a voltage of 5V. When 1 is applied to the power ic, it conducts. The power management is mounted by a Through Hole-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. There are 8 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 4.5V, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Through Hole mounting type. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supply current of the power management is 500μA. For similar manage ics search of the manufacturer, you can always refer to DS1231, the base PMIC number. This power management requires 5V power to work. The maximum supply temperature is 2mA.

DS1231-35 Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
500μA operating supply current

DS1231-35 Applications


There are a lot of Maxim Integrated DS1231-35 Voltage Supervisors applications.

  • Radar
  • emergency room
  • Battery cars
  • Leakage protection
  • Smartphones
  • Electric heating appliances
  • Microcontroller system
  • Power communication system
  • Leakage current detection
  • Power distribution systems of operating room

Write a review

Note: HTML is not translated!
    Bad           Good