banner_page

DS1231-35N

5V8 Terminals 8-Pin DS1231 Voltage supervisor1 Channels Min 4.5V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1231-35N
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 716
  • Description: 5V8 Terminals 8-Pin DS1231 Voltage supervisor1 Channels Min 4.5V Max 5.5V (Kg)

Details

Tags

Parameters
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish MATTE TIN
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number DS1231
Output Open Drain or Open Collector
Pin Count 8
JESD-30 Code R-PDIP-T8
Operating Supply Voltage 5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Operating Supply Current 2mA
Max Supply Current 2mA
Adjustable Threshold NO
Watchdog Timer No
Reset Active High/Active Low
Voltage - Threshold 4.37V 4.62V
Number of Voltages Monitored 1
Reset Timeout 150ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.74V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.74V
Height Seated (Max) 4.572mm
Length 9.375mm
Width 7.62mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 1998
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8

DS1231-35N Overview


A total of 8 terminals are used to mount this power management. Packaged in the form of a Tube, power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. The package peak reflow temperature is specified to be 260. When a supply voltage of 5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. The mount is attached to Through Hole. Power management has a total of 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4.5V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Through Hole is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The supervisor's supply current is specified to 2mA. A similar IC managements number of the manufacturer can always be found by using DS1231, the base power ics number. The maximum supply temperature is 2mA.

DS1231-35N Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
2mA operating supply current

DS1231-35N Applications


There are a lot of Maxim Integrated DS1231-35N Voltage Supervisors applications.

  • Refrigeration
  • Battery-powered equipment
  • Leakage protection
  • Utility meter
  • Linux and server computing
  • Computer applications
  • Important electronics for automotive safety
  • Telecommunications equipment
  • Radar
  • Functional modules

Write a review

Note: HTML is not translated!
    Bad           Good