DS1231-50N
| Parameters | |
|---|---|
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS1231 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2mA |
| Max Supply Current | 2mA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.74V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.74V |
| Height Seated (Max) | 4.572mm |
DS1231-50N Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tube. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 240. Manage ics operate at 5V supply voltages. During operation, the power ic is supplied with a voltage of 1. Using Through Hole, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 8. A voltage (Vsup) that doesn't fall below 4.5V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Through Hole. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supply current of the power management is 2mA. A similar IC managements number of the manufacturer can always be found by using DS1231, the base power ics number. It requires 5V watts of power to operate this voltage supervisor. At most, voltage supervisor can operate at a supply temperature of 2mA.
DS1231-50N Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
2mA operating supply current
DS1231-50N Applications
There are a lot of Maxim Integrated DS1231-50N Voltage Supervisors applications.
- Kitchen appliances
- DC stabilized power supply module
- Battery cars
- Transformer load monitoring equipment
- Microcontroller system
- Military communications
- Power distribution systems of operating room
- Dash board
- Electrical fire monitoring system
- Utility meter
