DS1231S-20
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | DS1231 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 500μA |
| Max Supply Current | 2mA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 150ms Minimum |
| Min Reset Threshold Voltage | 3.3V |
| Max Reset Threshold Voltage | 4.74V |
| Undervoltage Threshold | 3.3V |
| Overvoltage Threshold | 4.74V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1231S-20 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. This power ic is packaged in a way that looks like a Tube. For your reference, this IC power includes a list of 1 functions. This power management is made up of 1 channels which are available in a series format. There are 16-SOIC (0.295, 7.50mm Width) functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a specification for the peak reflow temperature of the package to be 245. IC management conducts at a voltage of 5V. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 16 pins on power management. There are 16 pins on the supervisor. Supply voltage (Vsup) should be at least 4.5V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during 0°C~70°C TA . As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a supply current of 500μA for the power management. A similar IC managements number of the manufacturer can always be found by using DS1231, the base power ics number. To be able to work, this power management requires 5V volts of power. The maximum supply temperature is 2mA.
DS1231S-20 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
500μA operating supply current
DS1231S-20 Applications
There are a lot of Maxim Integrated DS1231S-20 Voltage Supervisors applications.
- Household appliances
- Electrical fire monitoring system
- Consumer electronics
- Power distribution systems of infant care room
- Microprocessor system
- Smartphones
- Medical-specific isolation transformer
- Leakage protection
- Battery-powered equipment
- Precision measurement
