Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.295, 7.50mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1998 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
TIN |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
DS1231 |
Output |
Open Drain or Open Collector |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
2mA |
Max Supply Current |
2mA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active High/Active Low |
Voltage - Threshold |
4.37V 4.62V |
Number of Voltages Monitored |
1 |
Reset Timeout |
150ms Minimum |
Min Reset Threshold Voltage |
4.5V |
Max Reset Threshold Voltage |
4.74V |
Undervoltage Threshold |
4.5V |
Overvoltage Threshold |
4.74V |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DS1231S-35+ Overview
Power management is mounted through 16 terminals. A Tube package is used to package the power management. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of 16-SOIC (0.295, 7.50mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. In total, IC powers are 16 pins on the board. 16 pins are present on the power management system. It is recommended that Vsup should not be less than 4.5V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. We recommend setting the supervisors to 0°C~70°C TA degrees. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a 2mA supply current present in the power management. You can always use DS1231, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 2mA can be used.
DS1231S-35+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
2mA operating supply current
DS1231S-35+ Applications
There are a lot of Maxim Integrated DS1231S-35+ Voltage Supervisors applications.
- Efficient information transmission
- Military communications
- Detection of phase imbalance
- Power distribution systems of operating room
- Smartphones
- Display equipment
- Rechargeable batteries
- Personal computers
- Transformer load monitoring equipment
- Satellite navigation