DS1232+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 8-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | MicroMonitor™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Simple Reset/Power-On Reset |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Base Part Number | DS1232 |
| Output | Open Drain, Push-Pull |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Max Supply Current | 2mA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.74V |
| Undervoltage Threshold | 3.3V |
| Overvoltage Threshold | 4.74V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1232+ Overview
A Tube package is used to package the power management. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Through Hole. 8 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 4.5V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Mounting type Through Hole is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. The power management's supply current is 500μA. For similar manage ics search of the manufacturer, you can always refer to DS1232, the base PMIC number. Voltage supervisor can work with a supply temperature of 2mA at the most. Located in the well-known MicroMonitor? series product line, this IC management is a kind of this series.
DS1232+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
500μA operating supply current
DS1232+ Applications
There are a lot of Maxim Integrated DS1232+ Voltage Supervisors applications.
- Detection of phase imbalance
- Cloud computing
- Leakage current detection
- Automotive power systems
- Power distribution systems of ICU
- Electronics installed in the vehicle
- Network equipment
- Analog circuit
- Household appliances
- Detection of phase loss
