Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
1999 |
Series |
MicroMonitor™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
Through Hole |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
PUSHBUTTON RESET OPTION |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
DS1232LP |
Output |
Open Drain, Push-Pull |
Pin Count |
8 |
Output Voltage |
5V |
Max Output Current |
10mA |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
200μA |
Nominal Supply Current |
200μA |
Max Supply Current |
200μA |
Adjustable Threshold |
NO |
Watchdog Timer |
Yes |
Reset |
Active High/Active Low |
Voltage - Threshold |
4.37V 4.62V |
Number of Voltages Monitored |
1 |
Reset Timeout |
Adjustable/Selectable |
Min Reset Threshold Voltage |
4.5V |
Max Reset Threshold Voltage |
4.74V |
Threshold Voltage |
+4.37/4.62V |
Undervoltage Threshold |
3.3V |
Overvoltage Threshold |
4.74V |
Height |
4.45mm |
Length |
9.91mm |
Width |
7.87mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DS1232LP+ Overview
It is mounted through 8 terminals on the power management. Packaged in the form of a Tube, power management is easy to use. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts in a 5V-voltage supply. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Through Hole. There is a subcategory called Power Management Circuits for this power management. It has a total of 8 pins that are attached to IC management. The pins of the power management system count 8. IC management can only work with a supply voltage of 4.5V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Through Hole is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Push-Pull. It is estimated that the voltage supervisor's supply current is 200μA. There are other features such as PUSHBUTTON RESET OPTION to name a few. You can always use DS1232LP, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 5V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 200μA. The IC power that you are looking at comes from our well-known MicroMonitor? series product line.
DS1232LP+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
DS1232LP+ Applications
There are a lot of Maxim Integrated DS1232LP+ Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Electronics installed in the vehicle
- Computer applications
- Battery cars
- Medical-specific isolation transformer
- Personal computers
- Leakage protection
- Stable power system
- Satellite navigation
- Analog circuit