DS1232LPN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | MicroMonitor™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1232LP |
| Output | Open Drain, Push-Pull |
| Pin Count | 8 |
| Output Voltage | 5V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 200μA |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.74V |
| Threshold Voltage | +4.37/4.62V |
| Undervoltage Threshold | 3.3V |
| Overvoltage Threshold | 4.74V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1232LPN+ Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tube model. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 8 pins. 8 pins are on the supervisor. Supply voltage (Vsup) should be at least 4.5V for this power management. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Through HoleThe temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain, Push-Pull. It is estimated that the voltage supervisor's supply current is 200μA. Power management is also possible to add other features such as PUSHBUTTON RESET OPTION to name a few. For similar manage ics search of the manufacturer, you can always refer to DS1232LP, the base PMIC number. This power management requires 5V power to work. The power management can work with a maximum supply temperature of 200μA. Supervisors from the well-known MicroMonitor? series product line are featured in this PMIC.
DS1232LPN+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
DS1232LPN+ Applications
There are a lot of Maxim Integrated DS1232LPN+ Voltage Supervisors applications.
- Analog circuit
- Household appliances
- Electrical fire monitoring system
- Efficient information transmission
- Battery cars
- emergency room
- FPGA design
- Magnetic resonance imaging
- Battery cars
- Cloud computing
