DS1232LPS
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | MicroMonitor™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | DS1232LP |
| Output | Open Drain, Push-Pull |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 200μA |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.74V |
| Threshold Voltage | +4.37/4.62V |
| Undervoltage Threshold | 3.3V |
| Overvoltage Threshold | 4.74V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1232LPS Overview
There are 8 terminals on this power management that allow it to be mounted. A Tube package is used to package the power management. In this PMIC, you can find 1 functions for your reference. There are 1 channels available on this supervisor, and each channel has a different function. There are 16-SOIC (0.295, 7.50mm Width) functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 245 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 8. There are 16 pins on the power managment ic. Supply voltage (Vsup) should be at least 4.5V for this power management. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during 0°C~70°C TA . Power management has an output of Open Drain, Push-Pull during operation. There is a 200μA supply current present in the power management. Supervisors are also additional features, such as [0] for example, which are worth mentioning. To find similar IC managements from the manufacturer, you can always search by DS1232LP. The voltage supervisor requires a power source of 5V volts in order to work correctly. Voltage supervisor can work with a supply temperature of 200μA at the most. Supervisors from the well-known MicroMonitor? series product line are featured in this PMIC.
DS1232LPS Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
DS1232LPS Applications
There are a lot of Maxim Integrated DS1232LPS Voltage Supervisors applications.
- Important electronics for automotive protection
- Electrical fire monitoring system
- Power distribution systems of CCU
- emergency room
- Data storage applications
- Medical-specific isolation transformer
- Military electronics
- Analog circuit
- Functional modules
- External alarm
