DS1232LPSN-2+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | MicroMonitor™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | DS1232LP |
| Output | Open Drain, Push-Pull |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Voltage | 7V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 500μA |
| Max Supply Current | 200μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.74V |
| Undervoltage Threshold | 3.3V |
| Overvoltage Threshold | 4.74V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1232LPSN-2+ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tube model. For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The package peak reflow temperature is specified to be 260. A supply voltage of 5V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. Surface Mount, Through Hole is the one that mounts power management. It has a total of 8 pins that are attached to IC management. Power managment ic pin count is 8. It is recommended that Vsup should not be less than 4.5V for this IC power. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain, Push-Pull. In order to maintain a stable supply current for the power management, 200μA is the recommended value. Power management is also possible to add other features such as PUSHBUTTON RESET OPTION to name a few. For similar manage ics search of the manufacturer, you can always refer to DS1232LP, the base PMIC number. At most, voltage supervisor can operate at a supply temperature of 200μA. It is one of the well-known MicroMonitor? series power ic line.
DS1232LPSN-2+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
DS1232LPSN-2+ Applications
There are a lot of Maxim Integrated DS1232LPSN-2+ Voltage Supervisors applications.
- Power distribution systems of infant care room
- Medical-specific insulation monitor
- Fire equipment power monitoring system
- Embedded computing
- Transformer load monitoring equipment
- Military electronics
- Detection of phase imbalance
- Leakage protection
- Display equipment
- Electronics installed in the vehicle
