DS1232S+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | MicroMonitor™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | TIN |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | DS1232 |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 500μA |
| Max Supply Current | 2mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.37V 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.74V |
| Undervoltage Threshold | 3.3V |
| Overvoltage Threshold | 4.74V |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1232S+ Overview
There are 16 terminals on this power management that allow it to be mounted. It is packaged with Tube. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 16-SOIC (0.295, 7.50mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. When 5V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. Surface Mount, Through Hole is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 16. There are 16 pins on the supervisor. Supply voltage (Vsup) should be at least 4.5V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. Supplied with a operating current of 500μA, this PMIC is capable of fully function as specified. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to DS1232, which is the base power ics number. There is a requirement for 5V power to power this power management. Voltage supervisor can work with a supply temperature of 2mA at the most. A PMIC from the well-known MicroMonitor? series of products is being offered here.
DS1232S+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
500μA operating supply current
DS1232S+ Applications
There are a lot of Maxim Integrated DS1232S+ Voltage Supervisors applications.
- Stable power system
- Utility meter
- Telecommunications equipment
- Cloud computing
- Embedded computing
- Leakage protection
- Microcontroller system
- WiFi router
- FPGA design
- Refrigeration
