DS1233-15
| Parameters | |
|---|---|
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS1233 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Output Voltage | 5V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.125V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4V |
| Max Reset Threshold Voltage | 4.24V |
| Threshold Voltage | +4.13V |
| Undervoltage Threshold | 4V |
| Overvoltage Threshold | 4.24V |
| Height | 4.95mm |
| Length | 4.95mm |
| Width | 3.94mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1233-15 Overview
This power management consists of 3 mounting terminals on which it can be mounted. Packaged in a Bulk-shape, IC management comes with a number of features. As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of TO-226-3, TO-92-3 (TO-226AA) functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 240. Manage ics operate at 5V supply voltages. Power ics operate at 1 supply voltages. By Surface Mount, Through Hole, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. 3 pins are present in total in this power management. This power management has 3 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Through Hole mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. The supervisor's supply current is specified to 50μA. It is always advisable to use DS1233, the base supervisor number, when searching for similar PMICs from the manufacturer. To be able to work, this power management requires 5V volts of power. Voltage supervisor can work with a supply temperature of 50μA at the most. Supervisors from the well-known EconoReset series product line are featured in this PMIC.
DS1233-15 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1233-15 Applications
There are a lot of Maxim Integrated DS1233-15 Voltage Supervisors applications.
- Leakage protection
- Important electronics for automotive safety
- Microcontroller system
- Consumer electronics
- Power distribution systems of infant care room
- Satellite navigation
- Utility meter
- Telecommunications equipment
- FPGA design
- Fire equipment power monitoring system
